I Added a 4TB Lexar NM790 to My GMKtec EVO-X2
My GMKtec EVO-X2 does double duty as my desktop on CachyOS and my local AI box. It ships with a 2TB SSD, and between models, video projects and everything else, mine was 86% full. So I bought a Lexar NM790 4TB with a heatsink, opened the mini PC up for the first time with no idea how to get in, and filmed the whole thing. Then I benchmarked the new drive against the stock one.
What you need
- The drive. The Lexar NM790 4TB is a standard M.2 2280 PCIe 4.0 x4 NVMe SSD. Lexar rates it at up to 7,400 MB/s read and 6,500 MB/s write. I used the heatsink version, and it fit fine in the second slot.
- Don't pay for PCIe Gen 5. The EVO-X2's M.2 slots are PCIe 4.0 x4. A Gen 5 drive will work, but it runs at Gen 4 speed.
- A small Phillips driver. The PH0 bit in my iFixit Pro Tech Toolkit kept slipping. The PH00 fit much better. The kit's pry tools also help with the rubber feet, and the magnetic driver makes the tiny M.2 screw a lot less stressful.
The install
- Peel off the two rubber feet. The screws hide under them, and the glue is strong. Keep each foot on its own side so the glue goes back where it came from.
- Remove the four screws. They have some threadlocker on them, so there's a bit of resistance. Use the PH00 bit and put some pressure on it.
- Open the right side. I opened the wrong panel first. That side is the motherboard and the CPU cooler, not the SSD slots. The M.2 slots are on the fan side. If you're following along, save yourself the extra screws.
- Install the SSD. The stock 2TB drive sits in one slot, and the second slot is right next to it. Take out the slot's screw, slide the drive in at an angle, check that the pins are fully seated, then press it down and put the screw back in.
- Close it up. Put the four screws back in a crisscross pattern, like lug nuts, and don't overtighten them. They're only holding a thin panel. The feet are keyed: one is marked 2 and the other 1, so put the 2 on the 2 side or it won't line up.
The whole job is two rubber feet, four screws and one panel. If you've ever built in a Mini-ITX case, this is easy by comparison. I also liked seeing the size of the fan and how easy the CMOS battery is to reach.
Setting it up in Linux
Back in CachyOS, I formatted the new drive as btrfs and mounted it at /mnt/data. A 4TB drive shows up as 3.7 TiB usable, because the box counts in terabytes and Linux counts in tebibytes. That same night I also put a second NM790 in my UGREEN Thunderbolt 5 dock, formatted exFAT so it can move between Linux and my Mac Studio. That one gets its own video.
In the video I said I went from almost full to "eight terabytes free." The real number is about 7.4 TiB usable across the two new drives.
The benchmarks
I used KDiskMark 3.3.0 with its default profile: 8 GiB test file, five passes per test, best pass reported. I ran the new Lexar four times and the stock drive once.
Sequential reads were a tie. The Lexar's best run hit 6,979 MB/s and the stock drive 6,972 MB/s. Sequential writes were close too: 6,313 versus 6,091 MB/s.
Random 4K at queue depth 32 is where the Lexar pulled away. It read at 1,319 to 1,782 MB/s across my four runs, against 284 MB/s on the stock drive, about five times faster. Random writes at the same depth were 1,229 versus 562 MB/s on the run I compared.
A few honest caveats:
- My stock drive was 86% full and the Lexar was empty. A nearly full SSD can slow down, so this is my real setup, not a clean drive-against-drive lab test.
- I ran the Lexar back to back. My third run was the slowest at 6,428 MB/s sequential read, and on camera I called that a 10% variance. Against the best run of 6,979 it's closer to 8%. I also said the drive was "rated at 7,200." Lexar's rating is 7,400 MB/s read.
- Five passes on one machine is a small sample. Treat the numbers as a snapshot, not a review lab result.
Was it worth it?
For me, yes, and mostly for the space. I'm willing to give up a little speed for capacity at this point, because storage prices are out of control, and the NM790 sits in the middle on price and speed compared with high-end drives. In my testing it gave up nothing on sequential speed and was much faster on random reads than the drive GMKtec shipped. If your EVO-X2 is filling up, the second slot is the easiest upgrade on this machine.
How much storage are you running in your mini PC, and what do you keep on it?
Sources
🎥 Gear links
- iFixit Pro Tech Toolkit
- Sony a6700 with 16-50mm kit lens
- Shure SM7B dynamic microphone
- Shure MVX2U Gen 2 audio interface
- Audio-Technica ATH-M50x headphones
- ADAM Audio D3V speakers
- GMKtec EVO-X2 AI Mini PC
- Logitech G PRO X Superlight 2 mouse
- NEEWER NL288 LED video light
Affiliate links may earn me a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
